What Is the Corvette C8 Bolt Pattern, Center Bore, and Lug Nut Torque?
The Corvette C8 bolt pattern is 5x120 (five lugs on a 120 mm circle), with a 66.9 mm center bore and M14x1.5 lug nut threads. Chevrolet's owner's manual lists 140 lb-ft (190 N·m) for the wheel nuts. The ZR1 is the one C8 to check separately. Shop wheels already sized for the car in our Corvette C8 collection.
If you are shopping for wheels, the Corvette C8 bolt pattern is the first number to lock down, because a wheel with the wrong pattern simply will not bolt on. This guide covers the specs most buyers search for, how they fit together, and the mistakes that cause vibration or damaged studs.
What is the Corvette C8 bolt pattern?
The C8 Corvette uses a 5x120 bolt pattern on the Stingray, Z06, and E-Ray. That means five lug holes spaced on a 120 mm pitch circle diameter (PCD). If you are new to the term, our guide to PCD and lug patterns shows how to measure it.
The ZR1 is the exception to check. Published fitment references disagree on its rear hub, and some list a different rear bolt pattern, so talk to our fitment experts before ordering wheels for a ZR1.
What is the C8 Corvette center bore?
The C8 hub bore is 66.9 mm. The center bore is the hole in the middle of the wheel that sits over the hub. A hub-centric wheel is machined to match the hub so the wheel is centered by the hub, not by the lug nuts. Our explainer on center bore and hub-centric rings goes deeper.
A wheel with a larger bore than 66.9 mm needs hub-centric rings to center properly. A wheel with a smaller bore will not slide onto the hub at all. Never machine a hub to make a wheel fit.
What is the C8 Corvette lug nut torque?
Chevrolet's owner's manual lists 140 lb-ft (190 N·m) for the C8's wheel nuts. Aftermarket wheels can come with their own torque guidance, so if the wheel maker gives a figure for its hardware, follow that.
- Start with clean, dry threads and a clean hub face. No oil or anti-seize on the studs unless the wheel maker says so.
- Thread every nut by hand first so none cross-thread.
- Snug them in a star (criss-cross) pattern with the wheel on the ground or on the hub.
- Torque in the same star pattern with a calibrated torque wrench. Never use an impact gun for the final pull.
- Re-check the torque after 50 to 100 miles.
For more on this, see our guide on how much to torque aftermarket wheels.
What lug nuts does a C8 Corvette use?
The factory lug nuts use an M14x1.5 thread, and they're made for the factory wheels. Aftermarket wheels can need a different seat style or nut length, and a mismatch is a safety problem, not a cosmetic one. A wrong seat can leave the nut contacting only a small area of the wheel, which can loosen over time. Our article on special lug nuts for aftermarket wheels explains how to match them.
Corvette C8 wheel specs at a glance
| Spec | Value | Notes |
|---|---|---|
| Bolt pattern | 5x120 | Stingray, Z06, E-Ray. Check ZR1 separately. |
| Center bore | 66.9 mm | Use hub-centric rings if a wheel's bore is larger. |
| Lug thread | M14x1.5 | Match seat type to the wheel. |
| Lug torque | 140 lb-ft (about 190 N·m) | Owner's manual figure. |
| Stingray factory front | 19x8.5 | 245/35ZR19 tires. |
| Stingray factory rear | 20x11 | 305/30ZR20 tires. |
Those are the Stingray's factory sizes; the Z06 steps up to 20-inch fronts and 21-inch rears. Remember that the C8 is a mid-engine car with a staggered setup, so front and rear wheels are not interchangeable. Our C8 wheel size guide covers 19/20 versus 20/21 choices.
Does the bolt pattern alone guarantee a wheel will fit a C8?
No. A matching bolt pattern only means the wheel can attach. Fitment also depends on width, offset, brake clearance, and tire size. The C8 has tight tolerances between the wheel, the suspension, and the bodywork, and the Z51 brakes add another clearance check.
This is why a car-specific wheel is a safer path than a universal one. Our Corvette C8 collection lists EVO forged monoblocks, one of our lines, in 19x8.5 / 19x11, 19x8.5 / 20x11, 20x9 / 20x11, and 20x9 / 21x12. EX2 (EX2 collection) and three-piece builds such as Corsa and Strada are specced per car, so their sizes can differ, and EVO Custom builds 17 to 24 inch for sizes we don't list.
What should you check before ordering C8 wheels?
- Your exact trim and model year (Stingray, Z51, Z06, E-Ray, or ZR1).
- Whether you have the standard or Z51 brakes.
- Front and rear width and offset for the stance you want.
- Lug nut seat type and thread, so the hardware matches the wheels.
- TPMS sensors, since sensors often need to be moved or replaced.
Tell our fitment experts your C8's year, trim, and brake package, and we'll spec the fitment. Ready to look? Browse the Corvette C8 collection.
Frequently asked questions
What bolt pattern does the Corvette C8 have?
The Corvette C8 Stingray, Z06, and E-Ray use a 5x120 bolt pattern. Check the ZR1 separately before ordering wheels.
What is the C8 Corvette center bore?
The C8 center bore is 66.9 mm. Wheels with a larger bore need hub-centric rings, and wheels with a smaller bore will not fit over the hub.
What is the lug nut torque for a C8 Corvette?
Chevrolet's owner's manual lists 140 lb-ft (190 N·m). Re-check the torque after 50 to 100 miles.
What thread size are C8 Corvette lug nuts?
The thread is M14x1.5. Make sure the lug nut seat style matches your wheels.
Can I use the same wheels front and rear on a C8?
Generally no. The C8 runs a staggered setup, with a wider rear wheel and different offsets front to rear, so the wheels are not interchangeable.
Written by Taylor Smith, co-founder of Variant Alloy Wheels, who has spent nearly two decades in the automotive aftermarket.



Share:
What Wheel Size Should You Run on a Tesla Model S Plaid? 19 vs. 20 vs. 21 Inch
What Is the Tesla Model S Plaid Bolt Pattern, Center Bore, and Lug Nut Torque?